Dynomotion

Group: DynoMotion Message: 4311 From: bradodarb Date: 3/25/2012
Subject: New build
Hello Tom


It seems there have been some updates to the TP, CoordMotion and GCodeInterpreter since the last full download.

Is the 429z current with respect to these changes? Or does a user need to download and recompile all updates?


Thanks,

Brad Murry
Group: DynoMotion Message: 4313 From: Tom Kerekes Date: 3/25/2012
Subject: Re: New build
Hi Brad,
 
V4.29z is basically current.  There is the one recent issue with loss of fixture offsets when hitting halt that needs to be patched if it is an issue for you .  The patch was described in a recent post.
 
Regards
TK

Group: DynoMotion Message: 4318 From: tmday7 Date: 3/25/2012
Subject: Re: New build
So these are the latest patch?
> http://dynomotion.com/Software/Patch/FixTP429Arcs/CoordMotion.cpp
>
> http://dynomotion.com/Software/Patch/FixTP429Arcs/TrajectoryPlanner.cpp

And i just replace the files with these 2 files?
Thanks,
Troy

--- In DynoMotion@yahoogroups.com, Tom Kerekes <tk@...> wrote:
>
> Hi Brad,
>  
> V4.29z is basically current.  There is the one recent issue with loss of fixture offsets when hitting halt that needs to be patched if it is an issue for you .  The patch was described in a recent post.
>  
> Regards
> TK
>
> From: bradodarb <bradodarb@...>
> To: DynoMotion@yahoogroups.com
> Sent: Sunday, March 25, 2012 2:59 PM
> Subject: [DynoMotion] New build
>
>
>  
> Hello Tom
>
> It seems there have been some updates to the TP, CoordMotion and GCodeInterpreter since the last full download.
>
> Is the 429z current with respect to these changes? Or does a user need to download and recompile all updates?
>
> Thanks,
>
> Brad Murry
>
Group: DynoMotion Message: 4319 From: Brad Murry Date: 3/25/2012
Subject: Re: New build

Yeah, I thought there were rounding issues that were also fixed before the fixture problem.

 

Am I way off base ?

 

-Brad

 

From: DynoMotion@yahoogroups.com [mailto:DynoMotion@yahoogroups.com] On Behalf Of tmday7
Sent: Sunday, March 25, 2012 7:45 PM
To: DynoMotion@yahoogroups.com
Subject: [DynoMotion] Re: New build

 

 

So these are the latest patch?

> http://dynomotion.com/Software/Patch/FixTP429Arcs/CoordMotion.cpp
>
> http://dynomotion.com/Software/Patch/FixTP429Arcs/TrajectoryPlanner.cpp

And i just replace the files with these 2 files?
Thanks,
Troy

--- In DynoMotion@yahoogroups.com, Tom Kerekes <tk@...> wrote:
>
> Hi Brad,
>  
> V4.29z is basically current.  There is the one recent issue with loss of fixture offsets when hitting halt that needs to be patched if it is an issue for you .  The patch was described in a recent post.
>  
> Regards
> TK
>
> From: bradodarb <bradodarb@...>
> To: DynoMotion@yahoogroups.com
> Sent: Sunday, March 25, 2012 2:59 PM
> Subject: [DynoMotion] New build
>
>
>  
> Hello Tom
>
> It seems there have been some updates to the TP, CoordMotion and GCodeInterpreter since the last full download.
>
> Is the 429z current with respect to these changes? Or does a user need to download and recompile all updates?
>
> Thanks,
>
> Brad Murry
>
Group: DynoMotion Message: 4320 From: Brad Murry Date: 3/25/2012
Subject: Re: New build

Sorry, almost forgot….

 

Troy,

 

Those need to copied and then the build all libs needs to be recompiled.  Copying in is not enough.

 

-Brad Murry

 

From: DynoMotion@yahoogroups.com [mailto:DynoMotion@yahoogroups.com] On Behalf Of tmday7
Sent: Sunday, March 25, 2012 7:45 PM
To: DynoMotion@yahoogroups.com
Subject: [DynoMotion] Re: New build

 

 

So these are the latest patch?

> http://dynomotion.com/Software/Patch/FixTP429Arcs/CoordMotion.cpp
>
> http://dynomotion.com/Software/Patch/FixTP429Arcs/TrajectoryPlanner.cpp

And i just replace the files with these 2 files?
Thanks,
Troy

--- In DynoMotion@yahoogroups.com, Tom Kerekes <tk@...> wrote:
>
> Hi Brad,
>  
> V4.29z is basically current.  There is the one recent issue with loss of fixture offsets when hitting halt that needs to be patched if it is an issue for you .  The patch was described in a recent post.
>  
> Regards
> TK
>
> From: bradodarb <bradodarb@...>
> To: DynoMotion@yahoogroups.com
> Sent: Sunday, March 25, 2012 2:59 PM
> Subject: [DynoMotion] New build
>
>
>  
> Hello Tom
>
> It seems there have been some updates to the TP, CoordMotion and GCodeInterpreter since the last full download.
>
> Is the 429z current with respect to these changes? Or does a user need to download and recompile all updates?
>
> Thanks,
>
> Brad Murry
>
Group: DynoMotion Message: 4321 From: tmday7 Date: 3/25/2012
Subject: Re: New build
Hmmm...
Not sure how that is done. Does this take another software to do?

Troy

--- In DynoMotion@yahoogroups.com, Brad Murry <bradodarb@...> wrote:
>
> Sorry, almost forgot….
>
>
>
> Troy,
>
>
>
> Those need to copied and then the build all libs needs to be recompiled.
> Copying in is not enough.
>
>
>
> -Brad Murry
>
>
>
> From: DynoMotion@yahoogroups.com [mailto:DynoMotion@yahoogroups.com] On
> Behalf Of tmday7
> Sent: Sunday, March 25, 2012 7:45 PM
> To: DynoMotion@yahoogroups.com
> Subject: [DynoMotion] Re: New build
>
>
>
>
>
> So these are the latest patch?
> > http://dynomotion.com/Software/Patch/FixTP429Arcs/CoordMotion.cpp
> >
> > http://dynomotion.com/Software/Patch/FixTP429Arcs/TrajectoryPlanner.cpp
>
> And i just replace the files with these 2 files?
> Thanks,
> Troy
>
> --- In DynoMotion@yahoogroups.com <mailto:DynoMotion%40yahoogroups.com> ,
> Tom Kerekes <tk@> wrote:
> >
> > Hi Brad,
> > Â
> > V4.29z is basically current. There is the one recent issue with loss of
> fixture offsets when hitting halt that needs to be patched if it is an issue
> for you . The patch was described in a recent post.
> > Â
> > Regards
> > TK
> >
> > From: bradodarb <bradodarb@>
> > To: DynoMotion@yahoogroups.com <mailto:DynoMotion%40yahoogroups.com>
> > Sent: Sunday, March 25, 2012 2:59 PM
> > Subject: [DynoMotion] New build
> >
> >
> > Â
> > Hello Tom
> >
> > It seems there have been some updates to the TP, CoordMotion and
> GCodeInterpreter since the last full download.
> >
> > Is the 429z current with respect to these changes? Or does a user need to
> download and recompile all updates?
> >
> > Thanks,
> >
> > Brad Murry
> >
>
Group: DynoMotion Message: 4322 From: Tom Kerekes Date: 3/25/2012
Subject: Re: New build
Hi Troy,
 
You don't work with source code.  All you should need to do is copy this one library binary file
 
 
to the C:\Kmotion429z\KMotion\Release directory.
 
Regards
TK
 
 
 
Group: DynoMotion Message: 4325 From: bradodarb Date: 3/26/2012
Subject: Re: New build
Hello Tom,


I think this poost had me confused, are you saying these have been updated and are already included win a 429z download?



> > > --- In DynoMotion@yahoogroups.com <mailto:DynoMotion%40yahoogroups.com> , Tom Kerekes <tk@> wrote:
> > > >
> > > > Hi Ray
> > > > ÃÆ'‚
> > > > Here areÃÆ'‚ the sources changed from V4.29z:
> > > > ÃÆ'‚
> > > > http://dynomotion.com/Software/Patch/FixTP429Arcs/CoordMotion.cpp
> > > > ÃÆ'‚
> > > > http://dynomotion.com/Software/Patch/FixTP429Arcs/TrajectoryPlanner.cpp
> > > > ÃÆ'‚
> > > > Regards
> > > > TK
> > > >


-Brad

--- In DynoMotion@yahoogroups.com, Tom Kerekes <tk@...> wrote:
>
> Hi Troy,
>  
> You don't work with source code.  All you should need to do is copy this one library binary file
>  
> http://www.dynomotion.com/Software/Patch/Fix429Z_FixtureHalt/GCodeInterpreter.dll
>  
> to the C:\Kmotion429z\KMotion\Release directory.
>  
> Regards
> TK
>  
>  
>  
> From: tmday7 <tmday@...>
> To: DynoMotion@yahoogroups.com
> Sent: Sunday, March 25, 2012 8:18 PM
> Subject: [DynoMotion] Re: New build
>
>
>  
> Hmmm...
> Not sure how that is done. Does this take another software to do?
>
> Troy
>
> --- In DynoMotion@yahoogroups.com, Brad Murry <bradodarb@> wrote:
> >
> > Sorry, almost forgot….
> >
> >
> >
> > Troy,
> >
> >
> >
> > Those need to copied and then the build all libs needs to be recompiled.
> > Copying in is not enough.
> >
> >
> >
> > -Brad Murry
> >
> >
> >
> > From: DynoMotion@yahoogroups.com [mailto:DynoMotion@yahoogroups.com] On
> > Behalf Of tmday7
> > Sent: Sunday, March 25, 2012 7:45 PM
> > To: DynoMotion@yahoogroups.com
> > Subject: [DynoMotion] Re: New build
> >
> >
> >
> >
> >
> > So these are the latest patch?
> > > http://dynomotion.com/Software/Patch/FixTP429Arcs/CoordMotion.cpp
> > >
> > > http://dynomotion.com/Software/Patch/FixTP429Arcs/TrajectoryPlanner.cpp
> >
> > And i just replace the files with these 2 files?
> > Thanks,
> > Troy
> >
> > --- In DynoMotion@yahoogroups.com <mailto:DynoMotion%40yahoogroups.com> ,
> > Tom Kerekes <tk@> wrote:
> > >
> > > Hi Brad,
> > > Â
> > > V4.29z is basically current. There is the one recent issue with loss of
> > fixture offsets when hitting halt that needs to be patched if it is an issue
> > for you . The patch was described in a recent post.
> > > Â
> > > Regards
> > > TK
> > >
> > > From: bradodarb <bradodarb@>
> > > To: DynoMotion@yahoogroups.com <mailto:DynoMotion%40yahoogroups.com>
> > > Sent: Sunday, March 25, 2012 2:59 PM
> > > Subject: [DynoMotion] New build
> > >
> > >
> > > Â
> > > Hello Tom
> > >
> > > It seems there have been some updates to the TP, CoordMotion and
> > GCodeInterpreter since the last full download.
> > >
> > > Is the 429z current with respect to these changes? Or does a user need to
> > download and recompile all updates?
> > >
> > > Thanks,
> > >
> > > Brad Murry
> > >
> >
>
Group: DynoMotion Message: 4326 From: Tom Kerekes Date: 3/26/2012
Subject: Re: New build
Hi Brad,
 
No I'm not saying that.  But both fixes were to the same modules and DLL.  So the last Patch DLL will update all the fixes.
 
Regards
TK

From: bradodarb <bradodarb@...>
To: DynoMotion@yahoogroups.com
Sent: Monday, March 26, 2012 6:47 AM
Subject: [DynoMotion] Re: New build

 
Hello Tom,

I think this poost had me confused, are you saying these have been updated and are already included win a 429z download?

> > > --- In DynoMotion@yahoogroups.com <mailto:DynoMotion%40yahoogroups.com> , Tom Kerekes <tk@> wrote:
> > > >
> > > > Hi Ray
> > > > ÃÆ'‚
> > > > Here areÃÆ'‚ the sources changed from V4.29z:
> > > > ÃÆ'‚
> > > > http://dynomotion.com/Software/Patch/FixTP429Arcs/CoordMotion.cpp
> > > > ÃÆ'‚
> > > > http://dynomotion.com/Software/Patch/FixTP429Arcs/TrajectoryPlanner.cpp
> > > > ÃÆ'‚
> > > > Regards
> > > > TK
> > > >

-Brad

--- In DynoMotion@yahoogroups.com, Tom Kerekes <tk@...> wrote:
>
> Hi Troy,
>  
> You don't work with source code.  All you should need to do is copy this one library binary file
>  
> http://www.dynomotion.com/Software/Patch/Fix429Z_FixtureHalt/GCodeInterpreter.dll
>  
> to the C:\Kmotion429z\KMotion\Release directory.
>  
> Regards
> TK
>  
>  
>  
> From: tmday7 <tmday@...>
> To: DynoMotion@yahoogroups.com
> Sent: Sunday, March 25, 2012 8:18 PM
> Subject: [DynoMotion] Re: New build
>
>
>  
> Hmmm...
> Not sure how that is done. Does this take another software to do?
>
> Troy
>
> --- In DynoMotion@yahoogroups.com, Brad Murry <bradodarb@> wrote:
> >
> > Sorry, almost forgot….
> >
> >
> >
> > Troy,
> >
> >
> >
> > Those need to copied and then the build all libs needs to be recompiled.
> > Copying in is not enough.
> >
> >
> >
> > -Brad Murry
> >
> >
> >
> > From: DynoMotion@yahoogroups.com [mailto:DynoMotion@yahoogroups.com] On
> > Behalf Of tmday7
> > Sent: Sunday, March 25, 2012 7:45 PM
> > To: DynoMotion@yahoogroups.com
> > Subject: [DynoMotion] Re: New build
> >
> >
> >
> >
> >
> > So these are the latest patch?
> > > http://dynomotion.com/Software/Patch/FixTP429Arcs/CoordMotion.cpp
> > >
> > > http://dynomotion.com/Software/Patch/FixTP429Arcs/TrajectoryPlanner.cpp
> >
> > And i just replace the files with these 2 files?
> > Thanks,
> > Troy
> >
> > --- In DynoMotion@yahoogroups.com <mailto:DynoMotion%40yahoogroups.com> ,
> > Tom Kerekes <tk@> wrote:
> > >
> > > Hi Brad,
> > > Â
> > > V4.29z is basically current. There is the one recent issue with loss of
> > fixture offsets when hitting halt that needs to be patched if it is an issue
> > for you . The patch was described in a recent post.
> > > Â
> > > Regards
> > > TK
> > >
> > > From: bradodarb <bradodarb@>
> > > To: DynoMotion@yahoogroups.com <mailto:DynoMotion%40yahoogroups.com>
> > > Sent: Sunday, March 25, 2012 2:59 PM
> > > Subject: [DynoMotion] New build
> > >
> > >
> > > Â
> > > Hello Tom
> > >
> > > It seems there have been some updates to the TP, CoordMotion and
> > GCodeInterpreter since the last full download.
> > >
> > > Is the 429z current with respect to these changes? Or does a user need to
> > download and recompile all updates?
> > >
> > > Thanks,
> > >
> > > Brad Murry
> > >
> >
>
Group: DynoMotion Message: 4329 From: tmday7 Date: 3/26/2012
Subject: Re: New build
Ok, got it. :) Posting results on cnczone
Thanks again,
Troy

--- In DynoMotion@yahoogroups.com, Tom Kerekes <tk@...> wrote:
>
> Hi Troy,
>  
> You don't work with source code.  All you should need to do is copy this one library binary file
>  
> http://www.dynomotion.com/Software/Patch/Fix429Z_FixtureHalt/GCodeInterpreter.dll
>  
> to the C:\Kmotion429z\KMotion\Release directory.
>  
> Regards
> TK
>  
>  
>  
> From: tmday7 <tmday@...>
> To: DynoMotion@yahoogroups.com
> Sent: Sunday, March 25, 2012 8:18 PM
> Subject: [DynoMotion] Re: New build
>
>
>  
> Hmmm...
> Not sure how that is done. Does this take another software to do?
>
> Troy
>
> --- In DynoMotion@yahoogroups.com, Brad Murry <bradodarb@> wrote:
> >
> > Sorry, almost forgot….
> >
> >
> >
> > Troy,
> >
> >
> >
> > Those need to copied and then the build all libs needs to be recompiled.
> > Copying in is not enough.
> >
> >
> >
> > -Brad Murry
> >
> >
> >
> > From: DynoMotion@yahoogroups.com [mailto:DynoMotion@yahoogroups.com] On
> > Behalf Of tmday7
> > Sent: Sunday, March 25, 2012 7:45 PM
> > To: DynoMotion@yahoogroups.com
> > Subject: [DynoMotion] Re: New build
> >
> >
> >
> >
> >
> > So these are the latest patch?
> > > http://dynomotion.com/Software/Patch/FixTP429Arcs/CoordMotion.cpp
> > >
> > > http://dynomotion.com/Software/Patch/FixTP429Arcs/TrajectoryPlanner.cpp
> >
> > And i just replace the files with these 2 files?
> > Thanks,
> > Troy
> >
> > --- In DynoMotion@yahoogroups.com <mailto:DynoMotion%40yahoogroups.com> ,
> > Tom Kerekes <tk@> wrote:
> > >
> > > Hi Brad,
> > > Â
> > > V4.29z is basically current. There is the one recent issue with loss of
> > fixture offsets when hitting halt that needs to be patched if it is an issue
> > for you . The patch was described in a recent post.
> > > Â
> > > Regards
> > > TK
> > >
> > > From: bradodarb <bradodarb@>
> > > To: DynoMotion@yahoogroups.com <mailto:DynoMotion%40yahoogroups.com>
> > > Sent: Sunday, March 25, 2012 2:59 PM
> > > Subject: [DynoMotion] New build
> > >
> > >
> > > Â
> > > Hello Tom
> > >
> > > It seems there have been some updates to the TP, CoordMotion and
> > GCodeInterpreter since the last full download.
> > >
> > > Is the 429z current with respect to these changes? Or does a user need to
> > download and recompile all updates?
> > >
> > > Thanks,
> > >
> > > Brad Murry
> > >
> >
>